Lift Float Switch Submersible Drainage Pumps
Turkey water pump manufacturer. Our elevator float switch products designed with the models; stainless body drainage submersible pumps SDF6A, drainage submersible pumps SDF13, dirty water submersible pumps SDF18/2Y-A, Septic Submersible pumps SDF14/2-A SDF18/2-A, SBRM18/2P-A in order to reduce to float switch problems in minumum liquid level where the pump running area is narrow.
While minimum 80*80cm well distance for running is needed because of cable lenght of the liquid level float switch, elevator models can reduce to the well distance until 45*45cm. Especially when the elevator holes have thin diameter problems, our evelator float switch models provides active advantage. Turkey domestic water pump manufacturing companies. Turkey manufacturer of drainage water pump.
SDF6A
SDF13A
Definition
Pump bodies can be different depending on the pump models as techno polymer and stainless steel. These are easily portable and easy to install pumps with elevator floater.
It is designed for use in the drainage of few dirty water.
This type of pumps are suitable for automatic operation in narrow places due to the elevator float.
SDF6A and SDF13A models have internal thermal protection and automatic reset.
The fact that the SDF18/2Y-A model has a suction filter provides an advantage against clogging risks.
It has a long term and provides quiet operation with oil cooled engine design.
These pumps are manufactured at frequencies of 50 Hz and 60 Hz.
Usage Areas
These pumps are used in residential areas, industrial facilities, to discharge rain water, waterfalls, basements, ornamental pools, narrow drainage and elevator pits, and to discharge standing water and water containing max. 6 mm particles.
Pump Material Characteristics
| Pump Body | Inox(SDF6A) – Pph (SDF13A) |
| Impeller | Noryl CAST IRON |
| Shaft | Aısı 304 Inox |
| Flow Rate(max) | 23 m3 /hour |
| Total Head (max) | 19 m |
| Liquid Temperature | 0-30°C |
| Protection Class | IP 68 |
| Insulation | CI.F |
| Cable Lenght | 10 m |
| Mechanical Seal | SIC/SIC |
| Pump Durability Pressure(Pmax) | 4 bar |
| Type | Control Panel | Open Impeller | Closed Impeller | Blade | Stainless(304) | Cast Impeller(GG25) | Noryl Impeller | Thermal Protection |
SDF6A | √ | √ | √ | |||||
SDF13A | √ | √ | √ | |||||
SDF18/2Y-A | √ | √ | √ |
Technical Specifications
| MOTOR | PUMP | |||||||||||||||||||
| TYPE | KW | HP | V | Hz | A | rpm | capacitor uf Vc | Hm | output | W | L | H | KG | m³/h | 1 | 2.5 | 3.5 | 4.5 | 5 | |
| SDF6A | 0,37 | 0.5 | 220 | 50 | 2.2 | 2900 | 10 | 450 | 8 | 1¼ | 290 | 170 | 365 | 6.5 | mss | 7 | 6 | 5 | 4 | 3 |
| MOTOR | PUMP | |||||||||||||||||||
| TYPE | KW | HP | V | Hz | A | rpm | capacitor uf Vc | Hm | output | W | L | H | KG | m³/h | 1 | 3 | 5 | 7 | 10 | |
| SDF13A | 1 | 1.3 | 220 | 50 | 4.4 | 2900 | 25 | 450 | 14 | 1¼ | 270 | 185 | 390 | 13.5 | mss | 13.5 | 12.5 | 11 | 9 | 4 |
SDF18/2Y-A
Definition
Pump bodies can be different depending on the pump models as techno polymer and stainless steel. These are easily portable and easy to install pumps with elevator floater.
It is designed for use in the drainage of few dirty water.
This type of pumps are suitable for automatic operation in narrow places due to the elevator float.
SDF6A and SDF13A models have internal thermal protection and automatic reset.
The fact that the SDF18/2Y-A model has a suction filter provides an advantage against clogging risks.
It has a long term and provides quiet operation with oil cooled engine design.
These pumps are manufactured at frequencies of 50 Hz and 60 Hz.
Usage Areas
These pumps are used in residential areas, industrial facilities, to discharge rain water, waterfalls, basements, ornamental pools, narrow drainage and elevator pits, and to discharge standing water and water containing max. 6 mm particles.
Pump Material Characteristics
| Pump Body | Inox |
| Impeller | GG25 CAST IRON |
| Shaft | Aısı 304 Inox |
| Flow Rate(max) | 23 m3 /hour |
| Total Head (max) | 19 m |
| Liquid Temperature | 0-30°C |
| Protection Class | IP 68 |
| Insulation | CI.F |
| Cable Lenght | 10 m |
| Mechanical Seal | SIC/SIC |
| Pump Durability Pressure(Pmax) | 4 bar |
| Type | Control Panel | Open Impeller | Closed Impeller | Blade | Stainless(304) | Cast Impeller (GG25) | Noryl Impeller | Thermal Protection |
SDF6A | √ | √ | √ | |||||
SDF13A | √ | √ | √ | |||||
SDF18/2Y-A | √ | √ |
Technical Specifications
| MOTOR | PUMP | |||||||||||||||||||
| Type | KW | HP | V | Hz | A | rpm | capacitor uf Vc | Hm | output | W | L | H | KG | m³/h | 3 | 8 | 12 | 16 | 20 | |
| SDF18/2-Y-A | 1.35 | 1.8 | 220 | 50 | 6.5 | 2900 | 30 | 450 | 19 | 2″ | 335 | 215 | 460 | 23 | mss | 18 | 16 | 13 | 10 | 6 |
SDF18/2-A
Definition
Pump bodies can be different depending on the pump models as techno polymer and stainless steel. These are easily portable and easy to install pumps with elevator floater.
It is designed for use in the drainage of few dirty water.
This type of pumps are suitable for automatic operation in narrow places due to the elevator float.
SDF6A and SDF13A models have internal thermal protection and automatic reset.
The fact that the SDF18/2Y-A model has a suction filter provides an advantage against clogging risks.
It has a long term and provides quiet operation with oil cooled engine design.
These pumps are manufactured at frequencies of 50 Hz and 60 Hz.
Usage Areas
These pumps are used in residential areas, industrial facilities, to discharge rain water, waterfalls, basements, ornamental pools, narrow drainage and elevator pits, and to discharge standing water and water containing max. 6 mm particles.
Pump Material Characteristics
| Pump Body | AISI 304 INOX |
| Impeller | GG25 CAST IRON |
| Shaft | AISI 304 INOX |
| Flow Rate(max) | 21 m3 /hour |
| Total Head (max) | 13.5 m |
| Liquid Temperature | 0-30°C |
| Protection Class | IP 68 |
| Insulation | CI.F |
| Cable Lenght | 10 m |
| Mechanical Seal | SIC/SIC |
| Pump Durability Pressure(Pmax) | 4 bar |
| Type | Control Panel | Open Impeller | Closed Impeller | Blade | Stainless(304) | Cast Impeller (GG25) | Noryl Impeller | Thermal Protection |
SDF14/2-A | √ | √ | √ | |||||
SDF18/2-A | √ | √ | √ |
Technical Specifications
| MOTOR | PUMP | |||||||||||||||||||
| Type | KW | HP | V | Hz | A | d/d | capacitor uf Vc | Hm | output | W | L | H | KG | m³/h | 2 | 6 | 10 | 16 | 20 | |
| SDF14/2-A | 1.1 | 1.5 | 220 | 50 | 5.5 | 2900 | 25 | 450 | 11.5 | 2″ | 175 | 340 | 460 | 19.5 | mss | 10.5 | 8.5 | 7 | 4 | – |
| SDF18/2-A | 1.35 | 1.8 | 220 | 50 | 6 | 2900 | 30 | 450 | 13.5 | 2″ | 175 | 340 | 460 | 20.5 | 12.5 | 10.5 | 8 | 5 | 3 | |