Hot Water Pressurization Pumps
SM6-S
Definition
Hot water pressurization pumps are peripheral pumps to designed to operate in hot water with automatic switches. This type of hot water pressurization pumps are manufactured at frequencies of 50 Hz and 60 Hz
Usage Areas
Hot water pressurization pumps are ideal pumps used to pressurize 0-80°C hot water produced in solar energy systems, and they also provide pressurized water by being connected directly to the mains line in homes when the mains pressure is insufficient.These pumps provides a definitive solution to the problem of devices such as washing machines, dishwashers, water heaters or combi boilers not working due to insufficient water pressure. This pump is automatically switches in and out according to the required pressure due to its flow switch.
Pump Material Characteristics
| Pump Body | GG25 CAST IRON |
| Impeller | Bronze |
| Shaft | Aısı 304 Inox |
| Liquid Temperature | 0-80°C |
| Protection Class | IP 54 |
| Insulation | CI.F |
| Mechanical Seal | Ceramic/Carbon |
Technical Specifications
| MOTOR | PUMP | |||||||||||||||||
| TYPE | KW | HP | V | Hz | A | rpm | capacitor | output | W | L | H | KG | 0.3 | 0.6 | 0.9 | 1.2 | 2 | |
| SM6-S | 0.37 | 0.5 | 220 | 50 | 1.7 | 2900 | 8 | 450 | 1″ | 220 | 240 | 140 | 7 | 26 | 21 | 18 | 14 | 7 |
Hot Water Pressurization Pump
Hot Water Pressurization pumps , produced by turkish hot water pressurization pump manufacturers , are designed to increase the liquid pressure in the installation that can be mounted on the pressure increasing water pump and the installation as the hot water pressurizer pump between 0 – 80°C produced by solar energy.
Due to the flow switch (valve) on it, in case of any hot water need, the pump is switched on and off as an automatic pressurization pump. Hot water pump , manufactured by turkish hot water pressurization pump producers , These are pressure increasing pumps that circulate the hot water provided by the solar energy panels on the roofs.
Hot water pumps are automatic hot water pumps that are used to make the devices work by being attached to the inlet of devices such as combi boilers, water heaters, washing machines and dishwashers that do not work due to insufficient water pressure in the house, as well as pressurization pumps that can be mounted on the plumbing pipe.
Since the Hot Water Pump selection is designed in line style, it can be cut into a straight pipe and easily mounted. The flow valve senses the flow and starts the pump when there is any hot water consumption in the building.
Regarding the installation of hot water pressurization pump , When the hot water consumption ends, the flow sensor stops the pump, as the flow will stop. In fact, the working structure is similar to the water booster, the pump starts and stops depending on the water consumption.
Hot Water Pressurization pumps are generally known as friction fan pumps, because the pump impeller provides pressure by rubbing against a surface.
Pump impellers and friction surfaces are generally made of stainless or bronze materials.
The mechanical seal of the Hot Water Primary Pumps is specially produced according to the normal centrifugal pumps, and the surface materials are designed as Ceramic / Carbon.